On my system this leaves a system tray icon which allows you to control whether Thunderbolt devices are allowed to connect and to view status. files, then you may need to use the Windows-X key combination to open Device Manager, find a device with a warning triangle next to it, and use the Update Driver button to locate your Thunderbolt drivers. If so then run it before you have any of your Apple adapters plugged in. Although it says these are for Windows 8.1 they work fine on Windows 10.ĭepending on your Thunderbolt driver software, there may be a. Windows 10 legacy IEE 1394 driver package.You will need to know which board you have so you can download the correct drivers. You might have a Gigabyte, MSI, Asus, etc. My motherboard is an Asrock so I got the software from their site. Thunderbolt driver software for your motherboard.Plenty of these available cheap on Amazon. Firewire 4 pin to 9 pin Firewire 800 cable.Apple Thunderbolt 2 to Thunderbolt 3 (= USB-C) adapter.Apple Firewire 800 to Thunderbolt 2 adapter.A USB-A (what most of understand as a USB connector!) 3.1 interface would probably work but I don't have a way to test it. This article explains how I was able to connect the camcorder to a USB-C port, control the camcorder, and capture video successfully. So my objective was to find a way to connect the camcorder to a USB port on my computer. In my case I have a mini ITX system with no PCI slot available for an internal Firewire card. Computers have not been equipped with a Firewire port for a while now. The DV camcorder, being 20 years old, has no USB port only a Firewire 400 IEE1394 port. To capture Mini DV (not HDV but the principles should apply) tapes into Premier Pro 2020 on Windows. Having had quite a battle with this I thought I'd put together some notes which it would have been very useful to be able to find in one place!
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |